Introduction

This feature was created to tackle the complexities of the Brazilian tax system, aiming to enable the creation of taxes in a fully configurable way. This routine gathers the main elements of a fiscal operation involving states of origin, destination, products,

Procedure for Utilization

Credit Reversal - With Product Resale

Requirements

• Environment updated to release 12.1.22.10 or above;

Registers, Configurations, Verification and Reports

The configurator of generic taxes is available on the menu of module Tax Records (SIGAFIS), on menu Updates → Facilitators → Tax Configurator (routine FISA170).

When you access the tax configurator, all registers needed for configuring are grouped and organized on the left side menu.

The routines are arranged in two main groups, Tax Rules and Financial Rules.  This This manual pertains the registers of group Tax Rules. For further information on the group Tax Rules, click click https://tdn.totvs.com/x/NBu9Gg

...

Registers Folder

Generic Tax Register

Use this routine to register generic taxes. This is the first registration you make for the system to process a new tax.

Example

In this register, fill in the following data:

Section Tax Definition:

Tax = Through this field, set the code for the new tax. Define it at will, though you cannot repeat it. This field is required.

Description = In this field, enter the description of the new tax. Describe it as you wish, to make identifying this tax easier.

Sphere = This field specifies the sphere of this tax. The options are 1 - Federal, 2 - State or 3 - Local. This field is not required.

Kind = In this field, select the tax kind. The options are 1-Tax, 2-Contribution, 3-Fund or 4-Fee.

Section Identifier - TOTVS ID:

Tax ID = In this field, enter the code that identifies the generic tax. We call this code the TOTVS ID.

The TOTVS ID concept enables the identification of a generic tax. The system automatically generates a fixed number for this ID. This ID basically calls "From To", from a generic tax with a random code set by the user to an actual, known tax.

Only fill in this field when you need to state the value of the generic tax in an ancillary obligation, such as SPED Fiscal; otherwise, there is no need to fill it in.

...

Tax Reference Unit Register

Use this routine to register a tax reference unit, with its respective quotation, on a monthly basis.

In this register, fill in the following data:

Section URF Definition

In this section, provide data to define and identify the URF.

Unit Code: In this field, enter the identifier code. This field is required and you can register no more than one URF with the same code, because this code is used for linking with the other entities, such as the rate rule.

Description: In this field, enter the URF description. Describe it as you wish, to make identifying the URF easier.

Section URF Values:

In this section, enter URF values on a monthly basis. When calculating the tax, the URF value is obtained in accordance with the month and year of document issue.

Month: In this field, enter the reference month for the URF value.

Year: In this field, enter the reference year for the URF value.

Value: URF value corresponding to the previously entered month and year.

...

Progressive Table Register

Use this routine to create progressive table rules, with data from the ranges composing a given progressive table as well as deduction values and rates. For example, you can use this routine to calculate Income Tax.

In this register, fill in the following data:

Section Progressive Table:

In this section, provide data to define and identify the Progressive Table.

Code: In this field, enter the identifier code. This field is required and you can register no more than one rule with the same code, because this code is used for linking with the other entities.

Description: In this field, enter the rule description. Describe it as you wish, to make identifying the rule easier.

Section Enter Range Values:

In this section, enter range values, one at a time.

Initial Value: In this field, enter the initial value of the range.
Final Value: In this field, enter the final value of the range.
Rate: In this field, enter the rate of the range.
Deduction Value: In this field, enter the value to be deducted from the range.

...

Register of Rules per NCM

Use this routine to configure taxes that require base value, increase or MVA. Configuring scenarios by NCM, specifying: tax, states of origin/destination, effective period, tax classification or measurement unit of product.

In this register, fill in the following data:

Section NCM:

NCM Code: In this field, enter the NCM code. This field is required and you can register no more than one rule with the same NCM, because this NCM is used for linking with the other entities.
Description: This field is automatically filled in with the NCM description registered in Protheus.

Section Taxes:

Tax: Tax Code to be bound to the NCM rule, which may have MVA, Base Value or Rate Increase. Tax examples: ICMS, ICMS ST, IPI, PIS, COFINS and more.
Description: This field is automatically filled in with the tax description registered in the Tax Configurator.

Added Value Margin:

Source State: State of Origin. If you want all States, enter **
Destination State: State of Destination. If you want all States, enter **
Start Date: Start Date of MVA validity
End Date: End Date of MVA validity
MVA: MVA calculation rate
MVA Auxiliary Index: MVA auxiliary index

Base Value:

Source State: State of Origin. If you want all States, enter **
Destination State: State of Destination. If you want all States, enter **
Start Date: Start Date of MVA validity
End Date: End Date of MVA validity
Measurement Unit: Product measurement unit to be used for calculating the Base Value
Base Value: Base Value to be added to tax calculation

Rate Increase:

Origin State: State of Origin of a product. If you want all States, enter **
Destination State: State of Destination of a product. If you want all States, enter **
Start Date: Start Date of MVA validity
End Date: End Date of MVA validity
Increase Percentage: Percentage of Increase used for calculating FECP or Increase.
Increase Auxiliary Index: Auxiliary index for calculating Increase

...

Dependents Register

Use this routine to handle all rules involving the deduction of values by dependents. We created this routine to eliminate the need for using parameters in SX6.

In this register, we basically define the deduction value per dependent, as well as the date criterion for using this deduction.

In this register, fill in the following data:

Section Enter the Rule Code:

Rule Code: In this field, enter the identifier code. This field is required and you can register no more than one rule with the same code, because this code is used for linking with the other entities.

Description: In this field, enter the rule description. Describe it as you wish, to make identifying the rule easier.

Section Rule Configuration: 

Value per dependent: Deduction value per dependent, to be multiplied by the registered quantity.

Date to be used when searching the balance per dependent: Date type with which the bill related to the invoice in Financials is queried. 1 = Issue; 2 = Actual Due Date; 3 = Booking Date; 4 = No Query in Financials.

...

Register of Service Provision Code Rules

Use this routine to set rules for obtaining the local tax rate, depending on the service provision code (SX5 - Table 60), whether local or federal, of the tax and city in which the local tax is due.

In this register, fill in the following data:

Section Service Code:

Service Code: In this field, enter the service code. This field is required and you can register no more than one rule with the same code, because this code is used for linking with the other entities.

Description: This field is automatically filled in with the service code description registered in Protheus.

Section Taxes: 

Tax: Tax Code to be bound to the service code, which may have a general rate configuration for all cities or a specific configuration per city.

Description: This field is automatically filled in with the tax description registered in the Tax Configurator.

Rate: Default rate for all cities that fit the rule.

Section Specific Rate by City: 

State: State that contains the specific rate by city

City Code: Code of city that contains the specific rate.

Description: This field is automatically filled in with the description of the city selected.

Specific Rate: Specific rate for the city that fits the rule.

...

Tax Status Code Register

Use this routine to register the CSTs of several taxes, such as ICMS, IPI, PIS, COFINS and more. When you access the configurator for the first time, the system runs an automatic load based on the CSTs already found in it, with the CST codes of ICMS (generic table S2), CSOSN (generic table SG), IPI (generic table S3), ISS (generic table S9), PIS (generic table SX) and COFINS (generic table SX).

In this register, fill in the following data:

Section Tax Status Code

In this section, provide data to define and identify the CST.

Code: In this field, enter the identifier code. This field is required and you can register no more than one with the same code, because this code is used for linking with the other entities, such as the bookkeeping rule.

Description: In this field, enter the description of the new tax status code group. Describe it as you wish, to make identifying the register easier.

Tax ID: Enter the code that identifies the generic tax that will contain a tax classification procedure. This Tax ID is the TOTVS ID code mentioned in the tax register.

Start Date: Start Date of CST register validity; that is, if the tax document date is previous to the start date of validity, the register is not used for CST classification. If it is after or equal, then the register is used. This field is required.

End Date: End Date of CST register validity. Of course, this is used only when the end date is known. When the end date of validity is not known, leave it blank.

Section CST:

In this section, enter the tax classification code and its respective description for the Tax ID selected.

CST: Enter the tax classification code.

Description: Description of the new tax classification code.

...

Bookkeeping Form Register

Use this routine to set the form generation rules (Table SF6). In various situations, when the invoice is issued, the need arises to generate forms, something currently done in legacy taxes through questions (Dictionary - SX1) in routines MATA461 and MATA103. With this routine, it is no longer necessary to fill in questions, but rather to configure it. The customer is free to define exactly in which situation their form should be generated or not.

In this register, fill in the following data:

Rule Definition Section

In this section, provide data to define and identify the CST.

Code (CJ4_CONDIGO): In this field, enter the identifier code. This field is required and you can register no more than one with the same code, because this code is used for linking with the other entities, such as Calculation Rule - Tax Documents.

Description (CJ4_DESCR): In this field, enter the description of the new bookkeeping rule. Describe it as you wish, to make identifying the register easier.

Section Form Generation Mode:

Mode for Bookkeeping Form Generation (CJ4_MODO): Mode of tax Payment form generation. 1=Invoice and 2=Verification.

View Form When Generating the Invoice (CJ4_VTELA): Option to view the form onscreen when adding the document.

Increase Form (CJ4_MAJSEP): Enter whether to generate separate forms when generating the form, if there is a tax increase calculation.

Section Form Generation Criterion:

State of Origin and Destination (CJ4_ORIDES): Generation of tax payment form for operations: 1=Interstate Only; 2=Internal Only; 3=Neutral.

Import or Export (CJ4_IMPEXP): Generation of tax payment form: 1=Import Only; 2=Export Only; 3=Neutral.

State Registration at State of Destination (CJ4_IE): Generate form for collection at State of Destination when: 1=Has SR; 2=Lacks SR; 3=Neutral.

Section GNRE Due Date:

Due Date (CJ4_CFVENC): Due Date Option: 1=Add business days; 2=Fixed Day current month; 3=Fixed Day following month.

Quantity of Days to Add (CJ4_QTDDIA): Quantity of days to be added in accordance with the option selected in due date configuration field (CJ4_CFVENC).

Date of Fixed Day (CJ4_DTFIXA): Fixed date for GNRE due date. This field is enabled in accordance with option 2 or 3 of field (CJ4_CFVENC).

Section GNRE Complementary Information:

CNPJ/EIN (CJ4_CNPJ): Printing of participant CNPJ/EIN in GNRE.

State Registration (CJ4_IEGUIA): State registration to be printed in GNRE. 1=Participant; 2=Sigamat (Company Register in Protheus); 3=SR of State.

State (CJ4_UF): State to be used when printing the GNRE: 1=Parameter (MV_ESTADO); 2=State of Origin; 3=State of Destination; 4=Invoice State.

Add. Info (CJ4_INFCOM): Code of additional information to be recorded in the Form complement.

Description (CJ4_DESINF): Description of additional information selected in field (CJ4_INFCOM).

...

Revenue Code Register

Use this routine to define which revenue code to use in the National Form for Collection of State Taxes (GNRE).
During the process of recording the generic tax GNRE, the revenue code classification will be requested. Based on the user definition, revenue codes can be defined by document template and State, so no other type of binding is needed in the tax configurator.

In this register, fill in the following data:

Section Rule Definition:

Tax Code (CJ5_CODIGO): Code of tax that contains the rule for generating the revenue code. Tax examples: ICMS, ICMS ST, IPI, PIS, COFINS and more.

Description (CJ5_DESCR): This field is automatically filled in with the tax description registered in the Tax Configurator.

Section Document Templates Definition:

Document Template (CJ7_ESPECI): Kind of tax document. (SX5 - Table 42). If you want to configure all kinds, enter ALL.

Description (CJ7_DESCR): Description of tax document kind registered in generic table.

Section Code by State:

State (CJ6_ESTADO): State that contains the rule. If you want to configure all states, enter **.

Revenue Code (CJ6_CODREC): Code of Revenue. Example: 100013 - Communication ICMS.

Revenue Det. (CJ6_DETALH): Details on Revenue. If the state lacks revenue code details, this field remains blank.

Reference (CJ6_REF): Reference period. Example: Monthly, 1st Fortnight, 2nd Fortnight, etc.

...

FCA Economic Indicators Register

Use this routine to register FCA (Update and Conversion Factor) Economic Indicators for each State/Period.

In this register, fill in the following data:

Section FCA (Update and Conversion Factor) Economic Indicators:

State (F0R_UF): State at issue.

Period (F0R_PERIOD):  Reference year and month.

Indicator (F0R_INDICE): Economic index for conversion factor.

...

Profiles Folder

Product Tax Profile Register

Use this register to define product tax profiles in accordance with criteria set by the customer themselves, for use in the generic taxes calculation.

In this register, fill in the following data:

Product Tax Profile

In this section, enter a code and a description to identify the profile registered. Be mindful that the product profile rule code cannot be repeated.

Products

On this grid, enter which products integrate the profile. There must be at least one line on this grid. The product cannot repeat itself in the same profile, and must have at least one product entered.

Product Origins

On this grid, enter the origins that belong in this profile. There must be at least one line on this grid. The product origin cannot repeat itself in the same profile, and must have at least one origin entered.

...

Operation Tax Profile Register

In this routine, enter operation profiles through CFOPs, Operation Type and Service Code, following criteria set by the customer, to be used in the generic tax engine configuration.

This register has an automatic load of profile suggestions that facilitate its use.

Operation Tax Profile

In this section, enter a code and a description to identify the profile registered. Be mindful that the product profile rule code cannot be repeated.

In this register, fill in the following data:

CFOPs

On this grid, enter which CFOPs compose this profile. There must be at least one line on this grid

Type of Operation

On this grid, enter which Operation Types compose this profile. There must be at least one line on this grid.

If you need to use all operation types in the profile, you do not need to type all operation types. Just add a line to the grid with the code "ALL" for the system to automatically use all operation types.

Service Code

On this grid, enter which Service Codes compose this profile. If not a service operation profile, leave this tab blank.

...

Participant Tax Profile Register

Use this routine to define participant profiles to calculate generic taxes, following criteria set by the customer.

In this register, fill in the following data:

Participant Tax Profile

In this section, enter a code and a description to identify the profile registered. Be mindful that the product profile rule code cannot be repeated.

Participants

In this section, define which participants compose the participants profile through fields:

Type: Use this field to define the participant type: 1 - Supplier (SA2) or 2 - Customer (SA1)

Participant: In this field, enter the participant code. This will be a customer or supplier code in accordance with the type specified previously.

Store: In this field, enter the participant's store, whether a customer or supplier store depending on the previously specified participant type.

...

Register of Origin and Destination Tax Profile

Use this register to define origin and destination tax profiles in accordance with criteria set by the customer themselves, for use in the generic taxes calculation. 

This register has an automatic load of profile suggestions that facilitate its use.

In this register, fill in the following data:

Origin and Destination Tax Profile

In this section, enter a code and a description to identify the profile registered. Be mindful that the product profile rule code cannot be repeated.

States of Origin/Destination

On this grid, enter the States of origin and destination that compose the profile.

Origin State: In this field, enter the state of origin of the operation.

Target State: In this field, enter the state of destination of the operation.

...

Tax Document Calculation Rules Folder

Calculation Base Rule Register

Use this routine to register a calculation base rule. When the tax is calculated, this rule is interpreted and the resulting value is used as calculation base.

Image ModifiedImage Modified

In this register, fill in the following data:

Calculation Base Definition

In this section, enter the definition and identification data of the rule and source value; that is, the starting value for base composition.

Rule Code: In this field, enter the identifier code. This field is required and you can register no more than one rule with the same code, because this code is used for linking with the other entities.

Description: In this field, enter the rule description. Describe it as you wish, to make identifying the rule easier.

Source Value: In this field, select the starting value for composing the calculation base. The available options are:

• 01 - Value of Goods: The starting value for the base is the value of the goods.
• 02 - Quantity: The starting value for the base is the quantity.
• 03 - Accounting Value: The starting value is the accounting value, calculated in accordance with settings already found in the system.
• 04 - Value of Presumed Credit: The starting value is the calculated value of presumed credit. Important: This option uses only presumed credit calculated through generic configuration; that is, through fields <F4_TPCPRES> and <F4_CRDPRES>.
• 05 - ICMS Base: The starting value is the ICMS base, calculated in accordance with settings already found in the system.
• 06 - Original ICMS Base: The starting value is the original ICMS base; that is, the ICMS base calculated in accordance with settings already found in the system, without taking base reductions into account.
• 07 - ICMS Value: The starting value is the ICMS value, calculated in accordance with settings already found in the system.
• 09 - Shipping Value: The starting value for the base is the value of shipping.
• 09 - Trade Note Value: The starting value is the trade note value, calculated in accordance with settings already found in the system.
• 10 - Item Total Value: The starting value for the base is the total value of the item, calculated in accordance with settings already found in the system.
• 11 - Manual Formula: When you select this option, Protheus interprets the contents of tab Calculation Formula Details, enabling a customized calculation of the calculation base in accordance with customer needs. See section Calculation Formula Details of this manual for more explanations on how to use it.

Additions and Deductions

In this section, define the additions and subtractions to be applied on the source value selected in field Source Value.

Fields Discount, Shipping, Insurance, Expenses, ICMS Exemp. and ICMS Withheld have the same goal and define the action of each value, respectively.

The available options are:

1 - No Action: The value at issue does not affect the source value.

2 - Subtract: The value at issue is subtracted from the source value.

3 - Add: The value at issue is added to the source value.

Calculation Base Reduction

In this section, if applicable, enter whether a reduction will be applied to the calculated base.

Reduction %: In this field, enter the reduction percentage to be applied to the calculation base.

Reduction Type: This field defines the moment in which the reduction configured in field Reduction % should be applied. Before or after additions and deductions. The options are:

1 - Reduce before additions/deductions: The base reduction is applied before additions and deductions.

Example:

• Value of goods: 1000.00
• Shipping (Sum): 100.00
• Expenses (Sum): 50.00
• Reduction: 30%

1,000.00 * 70% = 700.00

= 700.00 + 150.00 = 850.00

= 850.00

2 - Reduce after additions/deductions: The base reduction is applied after additions and deductions.

Example:

• Value of goods: 1,000.00
• Shipping (Sum): 100.00
• Expenses (Sum): 50.00
• Reduction: 30%

1,000.00 + 100.00 + 50.00 = 1,150.00

= 1,150.00 * 70% = 805.00

= 805.00

Calculation Base by Quantity

In this section, available only when the source value is equal to 02 - Quantity, define whether to convert the quantity entered in the item to a specific measurement unit (only for purposes of defining the generic tax calculation basis).

Unit: In this field, enter the measurement unit to be used in the calculation base conversion. 

The quantity is converted in accordance with the settings of fields already found in the product register; that is, the 1st and 2nd measurement units, the conversion factor and the conversion type, following these criteria:

If no specific measurement unit is defined, no conversion is made; therefore, the calculation base is exactly the quantity entered in the document item.

Example:

• 1st measurement unit of product: CX (Box)
• 2nd measurement unit of product: PC (Part)
• Conversion factor: 10.00
• Conversion type: M - Multiplier
• Quantity in document item: 3.00
• Unit entered in field Unit: None

Resulting calculation base: 3.00

If you define a specific measurement unit and it corresponds to the first product measurement unit, no conversion is made either; therefore, the calculation base is exactly the quantity entered in the document item.

Example:

• 1st measurement unit of product: CX (Box)
• 2nd measurement unit of product: PC (Part)
• Conversion factor: 10.00
• Conversion type: M - Multiplier
• Quantity in document item: 3.00
• Unit entered in field Unit: CX (Box)

Resulting calculation base: 3.00

If you define a specific measurement unit and it corresponds to the second product measurement unit, the quantity entered in the document item is converted in accordance with the conversion type and factor defined in the product at issue.

Example:

• 1st measurement unit of product: CX (Box)
• 2nd measurement unit of product: PC (Part)
• Conversion factor: 10.00
• Conversion type: M - Multiplier
• Quantity in document item: 3.00
• Unit entered in field Unit: PC (Part)

Resulting calculation base: 30.00

If you define a specific measurement unit and it corresponds neither to the first nor to the second product unit, then the calculation base cannot be defined; therefore, the tax at issue is not calculated.

Example:

• 1st measurement unit of product: CX (Box)
• 2nd measurement unit of product: PC (Part)
• Conversion factor: 10.00
• Conversion type: M - Multiplier
• Quantity in document item: 3.00
• Unit entered in field Unit: UN (Unit)

Resulting calculation base: 0.00.

...

Rate Rule Register

Use this routine to register rate rules for generic taxes. This rule is interpreted when bookkeeping the tax document and the value obtained through it is used as a generic tax rate.

Image ModifiedImage Modified

In this register, fill in the following data:

Rate Definition

In this section, define the rule code, a description and the source value of the rate, in accordance with the fields below:

Rule Code = In this field, define the rule code. This field is required and you can define as you wish, though you cannot repeat it.

Description = In this field, enter the description of the rate rule. Describe it as you wish, to make identifying this tax easier.

Source Value = This field is required. Enter the source of the rate through the options below:

• 01 = ICMS Rate - The ICMS Rate specified in the tax document is used.
• 02 = Presumed Credit Rate - The rate of Presumed Credit specified in the tax document is used. The presumed credit used ins the generic one, defined through fields Pres Cred. (F4_CRDPRES) and Pres Cred Tp (F4_TPCPRES) of the TIO Register.
• 03 = ICMS ST Rate - The ICMS ST Rate specified in the tax document is used.
• 04 = Manually Entered Rate - Select this option to define a manual fixed rate. When you select this option, the Manually Entered Rate section is enabled, allowing the manual typing of the rate.
• 05 = Tax Reference Unit (URF) - Select this option to enable the Tax Reference Unit section, allowing the use of a previously registered URF.
• 06 = Manual Formula - When you select this option, Protheus interprets the contents of tab Calculation Formula Details, enabling a customized calculation of the rate in accordance with customer needs. See section Calculation Formula Details of this manual for more explanations on how to use it.
• 07 = Progressive Table - Select this option to use the progressive table rule for rate calculation.

Manually Entered Rate

This section is only enabled when field Source Value is set to option 04. Here you can manually define the fixed rate through fields:

Rate Type = In this field, define the type of rate. Use option 1 - Percentage to define the rate as a percentage and option 2 - Measurement Unit to define the rate as a fixed value to be applied in the tax calculation.

Rate = In this field, enter the manual rate.

Tax Reference Unit

This section is only enabled when field Source Value is set to option 05. In this section, define the use of a URF as rate through fields:

URF Code = Enter the code of the previously registered URF.

URF Perc. = In this field, enter the URF percentage to be used. By default, this field is set to 100% URF utilization.

...

Bookkeeping Rule Register

This register aims to configure the tax bookkeeping. This rule register is similar to the TIO register, regarding Record and CST field configurations.

This rule is bound within Calculation Rule - Tax Documents in field "Bookkeeping" (F2B_CODESC).

Image Modified

In this register, fill in the following data:

Section Bookkeeping Rule Definition:

In this section, define the rule code and a description. The code is exclusive and cannot be changed or repeated.

Section Levy:

In this section, define who the tax is levied, including the tax classification, tax levy, reduced installment levy, effect on invoice total and the deferral percentage.

Section Tax Status Code:

In this section, define which CST to use for bookkeeping a tax configured in routine Calculation Rule - Tax Documents.

...

Calculation Rule Register - Tax Documents

This register aims to register the generic tax; that is, to define when and how to perform the calculations, using previously registered profiles and rules. This register also defines how to generate financial bills and whether the tax is used in the verification of generic taxes. Thus you can calculate, collect and verify new taxes in a simple and quick way, with no need to create new parameters or new system fields.

For example, suppose we previously register the tax XPTO, a tax for which the following hypotheses exist: Withholding by Tax Authorities, Credit and Collection on Verification. The need to create three calculation rules for this tax soon arises; that is, three tax calculation variations, one for withholding by tax authorities, another for credit and the third one for verification. Thus, you must create the calculation rules for each tax variation. Be mindful that the routine allows registering as many variations as needed.

Image Modified

Image Modified

Image Modified

Image Modified

Rule Definition

This section aims to identify the tax calculation rule using a code, description and validities.

Rule Code (F2B_REGRA): In this field, define the calculation rule code of generic tax. This code is required and cannot be repeated within the same validity. This code is displayed in the fiscal document taxes tab when the tax is calculated.

Description (F2B_DESC): This required field helps to identify the tax calculation rule. This description is displayed in the taxes tab when the tax is calculated.

Tax (F2B_TRIB): In this required field, enter the tax code to which this rule belongs. A tax may have several calculation rules; however, a calculation rule can have only one tax.

Start Date (F2B_VIGINI): Enter the start date of calculation rule validity; that is, if the tax document date is before the start date of validity, the tax rule is not calculated. If after or equal to it, then the calculation rule can be executed. This field is required.

End Date (F2B_VIGFIM): Enter the end date of tax rule validity. Of course, this is used only when the end date is known. When the end date of validity is not known, leave it blank.

When you fill in the initial and final validities, the system checks whether the document date is between the initial and final validities. When there is only the initial validity, the system checks the document date with the initial validity and regards the blank final validity as valid/in effect.

Calculation Rules

This section aims to define how to calculate the tax, how to generate the financial bills (if any) and how to generate it on verification (if any).

Calculation Base (F2B_DESC): Define the calculation base to calculate the tax through a previously registered Calculation Base rule. Be mindful that if the value set in the Calculation Base Rule is not found in the tax document, the generic tax is also not calculated.

Rate (F2B_RALIQ):Define the rate to calculate the tax through a previously registered rate rule. Be mindful that if the value set in the Rate Rule is not found in the tax document, the generic tax is also not calculated.

Financial (F2B_RFIN):In this field, enter a financial rule that defines how to generate the financial bill of this tax. Fill in this field only when you need to generate bills for withholding by tax authorities or collections on tax document issue, otherwise leave it blank. We must emphasize that if the tax must be collected through a verification, it is very likely that you should not fill in this field, otherwise the tax may be collected twice, in the tax document and also in the verification.

Round Config (F2B_RND):In this field, define the bill rounding rule, whether rounded or truncated. This field is not required. If blank, the calculated value is rounded by default. This field operates jointly with parameter MV_RNDSOBR. For further information on this parameter, refer to the documentation  https://tdn.totvs.com/x/2Ni-HQ

Tax Limitation Rules

Min. Oper. of Tax Limitation (F2B_OPRMIN) - Limiting operator of Tax being configured. In this field, you may set limits by primary operator values.

Max. Oper. of Tax Limitation (F2B_OPRMIN) - Limiting operator of Tax being configured. In this field, you may set limits by primary operator values.

Min. Manual Value (F2B_VLRMIN) - This field is enabled along with field Minimum Operator, being editable when the value of field minimum operator is = "O:VAL_MANUAL"

Max. Manual Value (F2B_VLRMIN) - This field is enabled along with field Maximum Operator, being editable when the value of field maximum operator is = "O:VAL_MANUAL"

Bookkeeping Rules

Verification Rule (F2B_RAPUR): In this field, enter the verification rule to define how to state and calculate tax values in the generic taxes verification. This field is not required. Fill it in only when the tax must be collected through a verification. We must emphasize that if the tax has an entered financial rule, it is very likely that you should not fill in this field, otherwise the tax may be collected twice, in the tax document and also in the verification.

Bookkeeping (F2B_CODESC): In these fields, enter the bookkeeping rule that defines whether to book the tax as charged, exempt or others. Also the CST of the tax, among other settings allowed by the register.

Complementary Rules

Tax for Increase (F2B_TRBMAJ): In this field, select a tax to calculate the increase.

Deduction per Dependent (F2B_DEDDEP): Rule code that contains data on the calculation base deduction per dependent. 

Progressive Table (F2B_DEDPRO): Rule code for progressive table deduction.

Form Gen. Rule (F2B_RGGUIA): Rule code for GNRE generation.

Auxiliary Calculation Base (F2B_RBASES): Rule code of secondary calculation base, for scenarios with base value calculation, when there is a need to calculate two calculation bases and use the one with the highest value.

Greater or smaller value between bases (F2B_MAXMIN): Select an auxiliary base in field F2B_RBASES to activate the field. Select 1=Higher - to load the higher value between the calculation base and the auxiliary calculation base. Select 2=Lower - to load the lower value between the calculation base and the auxiliary calculation base.

Profile Definition

This section aims to define when to calculate the tax, based on Origin/Destination, Participant, Operation and Product profiles.

The generic tax calculation rule is only executed when the invoice data (State of Origin, State of Destination, Participant, CFOP, Operation Type, Product and Product Origin) match all the profiles entered in this section.

Ori/Des Prof. (F2B_PEROD): In this field, define the Origin/Destination Profile for the calculation rule. Be mindful that the States of Origin and Destination of the tax document are compared with the States of Origin and Destination that compose this profile.

Part Prof.  (F2B_PERFPA): In this field, define the Participant Profile for the calculation rule. Be mindful that the Participant (client or supplier) of the tax document is compared with the Customers and Suppliers that compose this profile.

Oper Prof. (F2B_PERFOP): In this field, define the Operation Profile for the calculation rule. Be mindful that the CFOP and Operation Type (if any) of the tax document are compared with the CFOPS and Operation Types that compose this profile.

Prod Prof. (F2B_PERFPR): In this field, define the Product Profile for the calculation rule. Be mindful that the Product and Product Origin of the tax document are compared with the Products and Product Origins that compose this profile.

...

Entry Adjustment Rule

Message Register

Use this routine to register messages. In this initial stage, this register services the messages used in EFD ICMS IPI in records 0460 (Tax Entry Notes Table), C195 (Tax Entry Notes (Codes 01, 1B, 04 and 55)) and C197 (Other tax obligations, adjustments and data on values from tax documents).

Example

In this register, fill in the following data:

Rule Code: Enter the Rule Code.

Description: Enter the name of the Message Rule

Filter Field: 

In field CJ8_TPREGR (Rule Type), selecting Taxes enables, in field CJ8_TRIFIL (Rule to be queried), the 3 spheres (State, Federal and Local), and, by selecting one of the options for query, the field CJ8_REGTRA (Tax) is filtered by Rule Type;

Image Modified

CJ8_TRIFIL (Rule to be queried)

Image Modified

CJ8_REGTRA (Tax)

Image Modified

If Rule Type is equal to Generic Taxes, field CJ8_TBCONF (Generic Tax) is enabled with the query in table F2B (Tax Rules).

If, in field CJ8_TPREGR (Rule Type), you select Invoice Data, then, in field CJ8_TRIFIL (Rule to be queried) the options Invoice Header and Items' Data are enabled. By selecting one of the options, then the field CJ8_CONSUL (Value to be Added to Formula) displays information such as Invoice Type, Operation Type, Item Number, Value of Goods, etc.

After selecting the previous information, you may add the content selected in field CJ8_CONSUL (Value to be Added to the Formula) to field CJ8_MENSG (Message Composition), by clicking the Add button. After the addition, just click Validate Message.

Image Modified

Image Modified

Entry Adjustment Rule

Use this routine to register the Entry Adjustment Codes, linking it to a Tax Document Rule to be created by the user, in accordance with its bookkeeping, hence stating the entry code data when the document is generated.

Thus, with this register we unify:

• Link of Entry Code registered in TIO.
• Link of Reflection Code for calculation rules, made in FISA072.
• Linking of messages on table CCE (Complementary Information) or in the TIO register (Table SF4), field F4_CODOBSE (Note Code) 
  • C197 
  • C195
  • 0460
• Regarding the entry codes related to IPI, there will be a link with block E531 of EFD ICMS/IPI.

Access - Updates → Facilitators → Taxes Configurator 

Image Modified

Image Modified

In this register, fill in the following data:

*Required Fields 

**Fields not Viewable in Browser

Section Entry Adjustment Rule Register. Fill in with Rule header data, where we find the fields:

1. CJ9_CODREG* - Rule Code
2. CJ9_DESCR* - Adjustment Rule Description
3. CJ9_VIGINI* - Start Date of Rule Validity
4. CJ9_VIGFIM* - End Date of Rule Validity
5. CJ9_ID** - Which is related to Table CJA - Entry Adjustment Rule Items.

Section Entries. Fill in the fields related to entry, validity and form codes.

1. CJA_CODREG** - Header Rule Code - To be related to Table CJ9
2. CJA_REGCAL* - Calculation Rule - We will have a standard query with Table F2B, in which the user selects the calculation rule that matches the Adjustment Code rule. In this field, instead of having a calculation in the reflection register, they would create their own calculation.      
3. CJA_CODTAB* - Entry Table - In this field, find available 4 entry tables 5.1.1 (CDO), 5.2 (CDY), 5.3(CC6) and 5.3.4(CCK)
4. CJA_CODLAN* - Entry Code - The table selected in field CJA_CODLAN  CODLAN  updates the standard query, returning the entry codes of each table.
5. CJA_VIGINI* - Entry Validity Start Date - The user enters the start date of entry code validity found in the TXT files downloaded from the website http://sped.rfb.gov.br/
6. CJA_VIGFIM* - Entry Validity End Date - The user enters the end date of entry code validity found in the TXT files downloaded from the website http://sped.rfb.gov.br/
7. CJA_GUIA - Generate Form - In this field, select the code with the rule for generating the Tax Payment Form.
8. CJA_TITULO - Generate Bill - In this field, select the code with the Bill rule, to be registered in routine Financial Rule.
9. CJA_GERMSG - Message Type - This field controls how to generate the message for 01 - Entry Code, in which a message is generated for each entry code, or 02 - Entry Code + Product, if a single message is generated for Entry and Product.
10. CJA_OPER - Operation - Enter the rule x entry code operation type to be used: 01 - Inflow; 02 - Outflow; 03 - Return;  
11. CJA_CNTRL - Operation State - Enter the State control of the Operation. This field functions jointly with the Entry Code. Example: SP000207 if you configure the State of Destination, to display the entry, your Customer must be from São Paulo; otherwise, if your Customer is from Rio de Janeiro and the entry is correct, just change the State from Control to Origin.

Section Values. Fill out the fields with values to inform EFD ICMS IPI records. 

1. CJA_NFBASE* - Use ICMS Base - This field offers 3 options - Value / Null / Zero, in case the calculation rule requires setting the ICMS Base to Zero, Value or NULL. If needed, record |BLANK| content in SPED.
2. CJA_NFALIQ* - Use Rate - This field offers 3 options - Value / Null / Zero, in case the calculation rule requires setting the ICMS Rate to Zero, Value or NULL. If needed, record |BLANK| content in SPED.
3. CJA_VALOR* - Use ICMS Value - Use this field to control how the rule interprets ICMS value contents when you need to generate field 7 of record C197, to be understood as Value. In this field, we have a standard query in CIN with Tax rule filter with field CJ9_REGCAL.
4. CJA_VLOUTR* - Use Other ICMS Value - Use this field to control how the rule interprets ICMS value contents when you need to generate field 8 of record C197, to be understood as Other. In this field, we have a standard query in CIN with Tax rule filter with field CJ9_REGCAL.
   
   

Section Messages. Enter the message data to be used in records 0460, C195 and C197.

1. CJA_CODMSG - Message Code - In this field, select the message pre-registered in routine FISA178 - Message Register to be used in EFD ICMS IPI Record C197 field 3. 
2. CJA_CODCPL - Complement Text - In this field, select the message pre-registered in routine FISA178 - Message Register to be used in EFD ICMS IPI Record C195 field 2 and field 3.    
3. CJA_TXTDSC - Description Text - In this field, select the message pre-registered in routine FISA178 - Message Register to be used in EFD ICMS IPI Record C195 field 2 and field 3.

Adjustment Rule Code Utilization Example

Follow the steps below to configure how to use the Adjustment Rule register

1. Make the Registrations
    
   1. Register the Tax

Image Modified

b. Register the NCM Rules

Image Modified

c. Register the Tax Status Code

Image Modified

...

2. Make the Profile Registrations

1. 1. Product Profile
      
      Image Modified
      
      
   2. Operation Profile
      
      
      Image Modified
      
      
      
   3. Participant Profile
      
      Image Modified
      
      
      
      
   4. Origin and Destination Profile
      
      Image Modified
      
 Tax
2. 1. 
      

 3. Tax Document Calculation Rules

1. 1. Calculation Base Rule
      
      

      1. ICMS Base Example
         
         Image Modified
         
         
         

      2. ICMS Base Exempted via Formula Example.
         
         Image Modified

iii. IPI Base Example
Image Modified

b. Rate Rule

Image Modified

c. Bookkeeping Rule

Image Modified

d. Calculation Rule - Tax Documents

In this register, we link the above relationship registers to be used in invoice calculations.

1. 1. 1. ICMS Rule
         
         Image Modified
         
         
      2. FECP Calculation Rule
         
         Image Modified
         
         
      3. Exempted ICMS Calculation Rule
         
         
         Image Modified
         
         
         
      4. IPI Calculation Rule
         Image Modified
 Entry

4. Entry Adjustment Rule

1. 1. Message Rule
      Image Modified
      
      Message with Specific Formula:
      Image Modified
      It is not enough to create the message. The next step is binding the message registered to an entry adjustment rule.
   2. Entry Adjustment Rule
      
      

i. ICMS Example - Entries Tab

Image Modified

The proposal of the register is to centralize the entry codes in the widest adjustment rule possible, so there is no need to create multiple entry adjustment rule registers for similar profiles; therefore, for release 12.1.2210, we have added two fields not illustrated in the example above, in which the user can choose when to use the entry code:

Image Modified

Field Operation - Valid Values (01-Inflow| 02-Outflow| 03-Return)
Field Operation Type - Valid Values (01-Origin State| 02-Destination State)

In the illustration above, we can see that several entry codes have been attributed even from another state, the branch of the example being SP.
Through fields Operation and Operation Type, the user can define when to use the entry code. In the example, an entry code was registered for the State of Rio de Janeiro, in which the fields Operation and Operation Type are respectively configured as "Outflow"|"State of Destination"; that is, the entry code is only displayed when an outgoing invoice is issued with RJ as its State of Destination.

In tab Entries, we also have the field "Message Type" with 3 possible options:

01- Entry Code by Period - In this configuration for EFD ICMS/IPI file creation purposes, the entry codes are grouped by period in accordance with the block in which a specific entry code fits the SPED.
02- Entry Code by Invoice - In this configuration for EFD ICMS/IPI file creation purposes, the entry codes are grouped by invoice in accordance with the block in which a specific entry code fits the SPED. Example: Block C195 and C197.
03- Entry Code by Item - In this configuration, for EFD ICMS/IPI file creation purposes, the entry codes do not have grouping; that is, they are detailed by item, as the record was originally recorded in CDA table.

ii. Tab Values

In tab Values, define how values are displayed in accordance with the entry code. This tab is very useful for the composition of block C197 and similar blocks in SPED FISCAL.

Image Modified

Example of Entry Configuration highlighting the value Other.

Image Modified

iii. Tab Messages

Use this tab to bind the messages registered in routine FISA178 (Message Register). In the example below, the fields are used in various ways:

Image Modified

Note: Fill out the field "Complement Msg Code" to correctly display it in SPED FISCAL.

iv. IPI Example

The IPI dynamic is similar to ICMS.

Image Modified

5. Applying the Invoice Entry Adjustment Rule

1. 1. Rule TRIB03, created with Exempted ICMS, was used in the Entry Adjustment register and will be stated in TAB Entry of the Financial Spreadsheet. This rule aims to calculate the values needed for display in the Entries indicated.
      
      Image Modified
      
      

   2. Rule IPI001 was created for generating "Other Credits" adjustment entry for IPI verification and also for its reflex in block E531 of EFD ICMS/IPI.
      
      
      
      Image Modified
      
      In the IPI verification, the IPI adjustment values from the tax configurator remain separate from values that come through TIO adjustment entries. The example below shows how the verification becomes with both entry types:
      
      Image Modified
      Manual entries keep the current behavior.

Verifications Folder

Verification Bill Rule Register

This register aims to define how to generate financial bills of generic tax verification, linking a financial bill rule to a tax through fields:

Image Modified

Tax: In this field, we define the tax to be processed in generic tax verification, which will need to generate a financial bill with the debit balance of the verification.

Bill Rule: In this field, enter the bill rule to be executed in verification, when generating the financial bill. For further information on how to register a financial rule, refer to https://tdn.totvs.com/x/NBu9Gg

...

Verification Rule Register

This register aims to define how to state and calculate generic tax values in generic tax verification, enabling the composition settings of verification reversals, credit and debit values. 

This register has an automatic load of rule suggestions that facilitate its use.

Rule Definition

In this section, enter a code and description to identify the verification rule.

...

After each verification, if debits have not surpassed credits, a credit balance is generated and this balance is carried forward to the next period for later use. Double click any of the credit balance lines (carried over, used or to be carried over) to list the balances used in the verification at issue, with their respective periods of origin, and also how much of each balance was used in the verification. Balances are consumed in order of generation; that is, from older to newer.

Pasta Relatórios

Relatório de Tributos Genéricos por Documento Fiscal

Com objetivo de auxiliar a conferência do cálculo dos tributos genéricos, disponibilizamos o relatório de tributos genéricos por documento fiscal, desta forma será possível conferir os valores dos tributos por item de documento fiscal, independentemente se o tributo gerou retenção, recolhimento ou apuração.

Image Removed

Para processar o relatório basta preencher as perguntas iniciais:

Data Inicial: Indique a data inicial para processamento do relatório

Data Final: Indique a data final para processamento do relatório

Seleciona Filiais: Esta pergunta quais filiais deverão ser consideradas para processamento do relatório, a opção 1-Sim abrir uma tela para selecionar uma ou mais filiais, já  opção 2-Não considera somente a filial logada.

Tributo: Neste campo informaremos qual tributo deverá ser processado no relatório. Somente será permitir processar um tributo por relatório.

Confirmando o processamento do relatório, serão listadas as notas que possuírem tributo genérico calculado no período e filial(s) especificado(s), considerando as notas fiscais que gravaram livro fiscal (tabelas SFT/SF3). Após a conclusão do relatório as informações nas seguintes estrutura:

Image Removed

Seção de cabeçalho do relatório:

Filial = Aqui será demonstrada a filial da nota fiscal

Operação NF = Este campo identifica a operação da nota fiscal nas seguintes hipóteses:

• Entrada Normal
• Saída Normal
• Serviço Tomado
• Serviço Prestado
• Devolução de Venda
• Devolução de Compra
• Nota em lote
• Beneficiamento
• Complemento de IPI
• Complemento de ICMS
• Complemento

Regra do Tributo = Neste campo será demonstrado o código da regra do tributo.

Descrição da Regra = Neste campo será exibida a descrição da regra de cálculo do tributo.

Seção de detalhamento do relatório:

A seção será composta pelas seguintes colunas:

Número NF = Número do documento fiscal.

Série NF = Série do documento fiscal.

Cod. Participante = Código do cliente/fornecedor.

Loja Participante = Loja do cliente/fornecedor.

Data = Data de emissão.

Item NF = Número do item.

CFOP = CFOP do item.

Unidade de Medida = Unidade de medida do item.

Base de Cálculo - Quantidade = Base de cálculo em quantidade do tributo genérico.

Base de Cálculo Tributo = Base de cálculo do tributo.

Alíquota Tributo = Alíquota do tributo genérico.

Valor Tributo = Valor calculado do tributo genérico.

Relatório de Conferência Escrituração

Com objetivo de auxiliar a conferência da escrituração dos tributos genéricos, disponibilizamos o relatório de conferência de escrituração por documento fiscal (analítico ou sintético), desta forma será possível conferir os valores dos tributos por item ou aglutinado por documento fiscal para os tributos que foram escriturados.

Image Removed

Para processar o relatório basta preencher as perguntas iniciais:

Data Inicial: Indique a data inicial para processamento do relatório

Data Final: Indique a data final para processamento do relatório

Seleciona Filiais: Esta pergunta quais filiais deverão ser consideradas para processamento do relatório, a opção 1-Sim abrir uma tela para selecionar uma ou mais filiais, já  opção 2-Não considera somente a filial logada.

Tributo: Neste campo informaremos qual tributo deverá ser processado no relatório. Somente será permitir processar um tributo por relatório.

Opção: Indique a opção do relatório, se deverá ser 1-Analítico ou 2-Sintético.

Confirmando o processamento do relatório, serão listadas as notas que possuírem tributo genérico calculado no período e filial(s) especificado(s), considerando as notas fiscais que gravaram livro fiscal (tabelas SFT/SF3) e a tabela de escrituração do configurador de tributos (CJ3).

Após a conclusão do relatório as informações nas seguintes estrutura para 1-Analítico:

Image Removed

Após a conclusão do relatório as informações nas seguintes estrutura para 2-Sintético:

Image Removed

Relatório de Conferência da Apuração

O objetivo deste relatório é auxiliar a conferência dos valores apresentados na apuração dos tributos genéricos. Para imprimir o relatório basta selecionar a apuração processada, ir em Outras Ações da apuração e selecionar a opção Relatório de Conferência da Apuração, que automaticamente o relatório será impresso.

Image Removed

O relatório tem 5 seções:

Débitos

Créditos

Ajustes

Saldo Credor

Resumo da Apuração

Seção de Débitos

A seção Débitos demonstrará os valores de origem de nota fiscal que geraram débito na apuração, bem como os valores das devoluções, esta seção é detalhada por regra de cálculo do tributo.

Image Removed

Seção de Créditos

A seção Créditos tem o mesmo princípio da seção Débitos, porém aqui será demonstrando os valores dos Créditos e suas devoluções.

Image Removed

Seção de Ajustes

A seção dos ajustes demonstrará os eventuais ajustes manuais de débito e de créditos feitos na apuração dos tributos genéricos. 

Exemplos de ajuste de Débito e Crédito respectivamente:

Image Removed

Image Removed

Seção de Saldos

A seção de saldos demonstra o detalhamento dos valores que compõem o saldo credor, exibindo a data de origem do saldo, o valor inicial do saldo no período, o valor utilizado no período e o saldo final do período.

Image Removed

Seção de Resumo

A seção de resumo da apuração demonstrará os totais da apuração:

• Débitos por Saída
• Estornos de Crédito
• Ajustes de Débito
• Totais de Débitos
• Saldo Credor Transportado do Período Anterior
• Saldo Credor do Período Anterior Utilizado
• Créditos por entrada
• Estornos de Débito
• Ajustes de Créditos
• Total de Créditos
• Saldo Devedor
• Saldo Créditos a Transportar para o Próximo Período

Image Removed

Facilitadores

Facilitador do cadastro de perfil

Para auxiliar na criação e manutenção dos perfis, foram disponibilizados facilitadores no menu Outras Ações -> Facilitador, localizados no cadastro de cada perfil. Através destes facilitadores, é possível efetuar inclusões ou exclusões em lote, sem necessidade de fazê-lo item a item.

O facilitador oferece possibilidade de montar um filtro na tabela de origem, e então realizar a inclusão ou exclusão do resultado deste filtro de uma só vez no(s) perfil(is) selecionado(s).

Para os  Perfis Tributários de Produto e de Participantes, quando usado a palavra chave TODOS, englobando todos os produtos, clientes ou fornecedores. Não será possível fazer a manutenção desses registros individualmente, visto que fisicamente não existe o vínculo de cada produto, cliente ou fornecedor nos cadastros existentes.

Seleção da operação

Nesta etapa deve ser selecionada qual operação será realizada: Inclusão ou Exclusão:

Image Removed

Seleção dos Perfis

Nesta etapa deve ser selecionado o perfil (ou os perfis) nos quais a inclusão ou exclusão será efetuada:

Image Removed

Filtros

Nesta etapa deve ser feito o filtro que será aplicado na respectiva tabela para seleção dos registros que serão incluídos ou excluídos do(s) perfil(is) selecionado(s):

Image Removed

Seleção de Registros

Nesta etapa são listados os registros resultantes do filtro aplicado. Os registros que, de fato, devem ser incluídos ou excluídos devem ser selecionados:

Image Removed

Resumo

Nesta última etapa deve ser efetuada a conferência/confirmação das operações que serão efetuadas:

Image Removed

Ao clicar em confirmar as operações serão efetuadas e os perfis selecionados serão alterados.

Facilitador do cadastro de Fornecedores, Clientes e Produtos

Além do facilitador existente no próprio cadastro dos perfis existem, ainda, outras duas formas para vincular produtos, clientes e fornecedores a um ou mais perfis.

Para utilizar esta funcionalidade:

1. Acesse o cadastro em questão.
2. Selecione um registro.
3. Clique em "Alterar" ou "Visualizar"
4. Acesse o menu "Outras Ações -> Perfis Tributários"

Serão listados os perfis nos quais o registro em questão está vinculado:

Image Removed

Através dos botões "Vincular a Outro(s) Perfil(s)" E "Desvincular do Perfil Selecionado" é possível vincular o registro a um ou mais perfis e também desvinculá-lo caso seja necessário.

Facilitador de Inclusão - Fornecedores, Clientes e Produtos

Além das duas formas citadas anteriormente, também é possível vincular um registro a um ou mais perfis no momento da inclusão. Após a inclusão efetiva do registro, o sistema irá validar se existem um ou mais perfis tributários cadastrados. Se existirem, a seguinte mensagem será exibida:

Image Removed

Ao clicar em sim, serão listados os perfis cadastrados e neste momento o registro já poderá ser vinculado a um ou vários perfis:

Image Removed

...

Reports Folder

Report of Generic Taxes per Tax Document

To support the checking of generic tax calculations, we offer the report of generic taxes per tax document, so you can check tax values per tax document item, regardless of whether the tax generated withholding, payment or verification.

Image Added

To process the report, just fill in the initial questions:

Start Date: Enter the start date to process the report.

End Date: Enter the end date to process the report.

Select Branches: This asks which branches to use for processing the report. Option 1-Yes opens a screen for selecting one or more branches, whereas option 2-No uses only the logged branch.

Tax: In this field, enter the tax to be processed in the report. You can only process one tax per report.

Once you confirm the report's processing, the invoices that have generic taxes calculated in the specified period and branch(es) are listed, considering invoices from tax records (tables SFT/SF3). After the report is finished, the data on the following structure:

Image Added

Report Header Section:

Branch = Here the branch of the invoice is stated

Invoice Operation = This field identifies the invoice operation in the following hypotheses:

• Regular Inflow
• Regular Outflow
• Service Received
• Service Rendered
• Sales Return
• Purchase Return
• Invoice in Batch
• Processing
• IPI Complement
• ICMS Complement
• Complement

Tax Rule = This field states the tax rule code.

Rule Description = This field displays the rule description of the tax calculation.

Report Detail Section:

The section is composed of the following columns:

Invoice Number = Number of tax document.

Invoice Series = Series of tax document.

Participant Code = Code of customer/supplier.

Participant Store = Store of customer/supplier.

Date = Date of issue.

Invoice Item = Number of item.

CFOP = CFOP of item.

Measurement Unit = Measurement unit of item.

Calculation Base - Quantity = Calculation base in quantity of generic tax.

Tax Calculation Base = Calculation base of tax.

Tax Rate = Rate of generic tax.

Tax Value = Calculated value of generic tax.

...

Bookkeeping Checking Report

To help checking the bookkeeping of generic taxes, we offer the report of bookkeeping checking per tax document (detailed or summary), so you can check the tax values by item or grouped by tax document for the taxes carried.

Image Added

To process the report, just fill in the initial questions:

Start Date: Enter the start date to process the report.

End Date: Enter the end date to process the report.

Select Branches: This asks which branches to use for processing the report. Option 1-Yes opens a screen for selecting one or more branches, whereas option 2-No uses only the logged branch.

Tax: In this field, enter the tax to be processed in the report. You can only process one tax per report.

Option: Enter the option of the report, whether 1-Detailed or 2-Summary.

Once you confirm the report's processing, the invoices that have generic taxes calculated in the specified period and branch(es) are listed, considering invoices from tax records (tables SFT/SF3) and the bookkeeping table of the tax configurator (CJ3).

After the report is finished, the data on the following structure for 1-Detailed:

Image Added

After the report is finished, the data on the following structure for 2-Summary:

Image Added

...

Verification Checking Report

This report supports checking the values displayed on the generic tax verification. To print the report, just select the verification processed, access Other Actions of the verification and select the option Verification Checking Report. The system automatically prints the report.

Image Added

The report has 5 sections:

Debits

Credits

Adjustments

Credit Balance

Verification Summary

Debits Section

Section Debits states the original invoice values that generated debit in the verification, as well as the return values. This section is detailed by tax calculation rule.

Image Added

Credits Section

The Credits section has the same principle as the Debits section; however, it states the values of Credits and their returns.

Image Added

Adjustments Section

The Adjustments section states occasional manual adjustments of debit and credit done in the generic taxes verification. 

Examples of Debit and Credit adjustments, respectively:

Image Added

Image Added

Balances Section

The balances section states the value details that compose the credit balance, displaying the start date of the balance, the initial value of the balance in the period, the value used in the period and the final balance of the period.

Image Added

Summary Section

The summary section of the verification states the verification totals:

• Debits by Outflow
• Credit Reversals
• Debit Adjustments
• Debit Totals
• Credit Balance Carried Over from the Previous Period
• Credit Balance of the Previous Period Used
• Credits by Inflow
• Debit Reversals
• Credit Adjustments
• Credits Total
• Debit Balance
• Credit Balance to Carry Over to Next Period

Image Added

...

Facilitators

Profile Register Facilitator

To support the creation and maintenance of profiles, we offer facilitators in menu Other Actions -> Facilitator, found in the register of each profile. You can use these facilitators to add or delete batches, with no need to do it item by item.

The facilitator enables the assembly of filters in the source table, then the addition or deletion of filter results all at once in the profile(s) selected.

For Participant and Product Tax Profiles, when the key word ALL is used, encompassing all products, customers or suppliers. You cannot perform maintenance on these records individually, given that the existing registers lack a physical link to each product, customer or supplier.

Selection of Operation

On this stage, select the operation to be executed: Addition or Deletion:

Image Added

Selection of Profiles

On this stage, select the profile (or profiles) in which the addition or deletion will be performed:

Image Added

Filters

On this stage, create the filter to be applied to the respective table, for selecting the records to be added or deleted from the profile(s) selected:

Image Added

Selection of Records

On this stage, list the records that result from the filter applied. Select the records that must actually be added or deleted:

Image Added

Summary

In this last stage, check/confirm the operations to be executed:

Image Added

Click Confirm to execute the operations and change the profiles selected.

...

Facilitator of Supplier, Customer and Product Registration

Besides the facilitator found in the profile register itself, there are also two other ways to link products, customers and suppliers to one or more profiles.

To use this feature:

1. Access the register at issue.
   2. Select a record.
   3. Click "Edit" or "View"
   4. Access the menu "Other Actions -> Tax Profiles"

The profiles to which the record at issue is linked are listed:

Image Added

Through buttons "Link to Other Profile(s)" AND "Unlink from the Profile Selected", you can link the record to one or more profiles and also unlink it when needed.

...

Addition Facilitator - Supplier, Customer and Product

Beside the two aforementioned methods, you can also link a record to one or more profiles when adding the record. After you have effectively added the record, the system validates whether one or more tax profiles have been added. If any, the following message is displayed:

Image Added

Click Yes to list the profiles registered. At this point you can already link the record to one or to several profiles:

Image Added

Históricos de Alterações

...

History of Changes

If the customer needs the history of changes for some configurator routines, they can find a feature that will help them with this information in Other Actions > History of ChangesCaso seja necessário obter o histórico de alteração de algumas rotinas do configurador foi criado dentro de Outras Ações > Histórico de Alterações uma funcionalidade para auxiliar o cliente com essas informações.

Rotinas que possuem essa funcionalidade:

Routines that have this feature:

• Dependents Register Cadastro de Dependentes (FISA160C)
• Regra de Calculation Base de Cálculo Rule (FISA161)Regra
• de Alíquota Rate Rule (FISA162)
• Regra de Escrituração Bookkeeping Rule (FISA160J)Regra
• de Cálculo - Documentos Fiscais Calculation Rule - Tax Documents (FISA160)

Detalhamento da Fórmula de Cálculo

...

Calculation Formula Details

In the registers of Calculation Base Rule Nos cadastros de Regra de Base de Cálculo (FISA161), Regra de Alíquota Rate Rule (FISA162) e Regra de Cálculo - Documentos Fiscais and Calculation Rule - Tax Documents (FISA160) foi disponibilizada uma nova aba com a fórmula do cálculo que o Protheus irá interpretar, we offer a new tab with the calculation formula that Protheus will interpret.

Nessa nova aba será possível editar a formula clicando apenas no botão Editar Fórmula, ao clicar no botão é liberado os seguintes campo:

Próximo passo é selecionar o tipo da regra a ser consultada:

• 1 - Valores de Origem
• 2 -  Regra Base de Cálculo
• 3 - Regra de Alíquota
• 4 - Regra de URF
• 5 - Regra de Tributo
• 6 - índices de Cálculo
• ZZ - Valor Manual

Valores de Origem

São criados automaticamente pelo sistema.

O Valor de Origem são valores que o Protheus já conhece e já foi calculado no momento da execução da fórmula, esses valores podem ser Valor da Mercadoria, Quantidade, Valor Contábil, Valor zero de base de cálculo ou alíquota, entre outros.

Exemplo:

Problema - Configurar uma alíquota com valor zero

Criarei uma nova Regra de Alíquota, selecionarei o Valor Origem = 06 - Fórmula Manual, na fórmula faço o seguinte passo:

• Campo Tipo da Regra a ser consultada = 01 - Valores de Origem
• Campo Consulta de Regra = O:ZERO
• Clicar no botão Adiciona

...

In this new tab, just click the Edit Formula button to edit the formula, activating the following field:

The next step is to select the rule type to be queried:

• 1 - Origin Values
• 2 - Calculation Base Rule
• 3 - Rate Rule
• 4 - URF Rule
• 5 - Tax Rule
• 6 - Calculation Indexes
• ZZ - Manual Value

Origin Values

The system creates them automatically.

Protheus already knows the Origin Value, having already calculated it on formula execution. This value can be the Value of Goods, Quantity, Accounting Value, Zero value of Calculation Base or Rate, etc.

Example:

Problem - Configure a rate with value zero

I will create a new Rate Rule and set the Origin Value = 06 - Manual Formula, taking the following step in the formula:

• Field Rate Rule to be queried = 01 - Origin Values
• Field Rule Query = O:ZERO
• Click Add

Calculation Base Rule

Select this option to enable the field Rule Query and select a Calculation Base Rule from the system. Thus, you can add another procedure to the formula, for the calculation base rule set in the system in any register with the Calculation Formula Details tab.

Example:

Problem - I need my calculation base to be the Value of Goods + BRL 100.00

In the system, I already have the Calculation Base Rule RB0001 selected in field Origin Value = 01- Value of Goods.

I will create a new Base Rule and set the Origin Value = 11 - Manual Formula, taking the following step in the formula:

• Field Rate Rule to be queried = 02 - Calculation Base Rule.
• Field Rule Query = RB0001
• Click Add
• Click +
• Field Rule Type to be queried = ZZ - Manual Value
• Field Value to be added to formula = 100
• Click Add

Rate Rule

Select this option to enable the field Rule Query and select a Rate Rule from the system. Thus, you can add another procedure to the formula, for the rate rule set in the system in any register with the Calculation Formula Details tab.

It is used the same way as the Calculation Base Rule.

URF (Tax Reference Unit) Rule

Select this option to enable the field Rule Query and select a Tax Reference Unit from the system. Thus, you can add the URF procedure to the formula in any register, or even to the rate, without selecting the Origin Value - 05 - Tax Reference Unit (URF).

Select the URF register and choose the operation, whether to add, subtract, multiply or divide the value. Click the operator button, then add the value. If you want to leave only the fixed value in the formula, click Clear and add the value.

Tax Rule

Use this binding to use a property from a tax in another tax.

Select this option to enable the field Tax to filter the query and the field Rule Query.

Field Tax to filter the query displays the taxes registered in the system. This field is useful for filtering the query of field Rule Query.

Field Rule Query displays some tax variations, such as

Ao selecionar essa opção é habilitado o campo Consulta de Regras, com isso é possível selecionar alguma Regra de Base de Cálculo que exista no sistema. Assim você poderá adicionar na fórmula outro tratamento de uma regra de base de cálculo configurada no sistema em qualquer cadastro que possua a aba de Detalhamento da Fórmula de Cálculo.

Exemplo:

Problema - Preciso que minha base de cálculo seja Valor da Mercadoria + R$100,00 reais

No sistema já possuo a Regra de Base de cálculo RB0001 que está selecionado no campo Valor Origem = 01- Valor da Mercadoria.

Criarei uma nova Regra de Base, selecionarei o Valor Origem = 11 - Fórmula Manual, na fórmula faço o seguinte passo:

• Campo Tipo da Regra a ser consultada = 02 - Regra Base de Cálculo.
• Campo Consulta de Regra = RB0001
• Clicar no botão Adiciona
• Clicar no botão +
• Campo Tipo da Regra a ser consultada = ZZ - Valor Manual
• Campo Valor a ser adicionado na fórmula = 100
• Clicar no botão Adiciona

...

Ao selecionar essa opção é habilitado o campo Consulta de Regras, com isso é possível selecionar alguma Regra de Alíquota que exista no sistema. Assim você poderá adicionar na fórmula outro tratamento de uma regra de alíquota configurada no sistema em qualquer cadastro que possua a aba de Detalhamento da Fórmula de Cálculo.

A forma de utilizar é a mesma da Regra de Base de Cálculo.

...

Ao selecionar essa opção é habilitado o campo Consulta de Regras, com isso é possível selecionar alguma Regra de Unidade Referência Fiscal que exista no sistema. Assim você poderá adicionar na fórmula o tratamento da URF em qualquer cadastro ou até mesmo na alíquota sem selecionar o Valor Origem - 05 - Unidade de Referência Fiscal (URF).

Selecione o cadastro da URF e escolha a ação que deseja fazer com o valor, caso o valor deva ser somado, subtraído, multiplicado, dividido, clicar no botão do operador e depois adicione o valor. Caso queira deixar apenas o valor fixo na fórmula, é preciso clicar no botão Limpar e depois adicionar o valor.

...

Utilizar essa amarração quando desejar utilizar uma propriedade de um tributo em outro tributo.

Ao selecionar essa opção é habilitada o campo Tributo para filtrar a consulta e o campo Consulta de Regras.

Campo Tributo para filtrar a consulta irá mostrar tributos cadastrados no sistema, esse campo serve para filtrar a consulta do campo Consulta de Regras.

Campo Consulta de Regras irá mostrar algumas variações do tributo, como:

• ISE:TRIBO
• OUT:TRIBUTO
• BAS:TRIBUTO
• ALQ:TRIBUTO
• VAL:TRIBUTO

...

Calculation Indexes

The system creates them automatically.

We have created the calculation index for operations that require a specific procedure, so Protheus can manage to identify that the formula may contain a service rate, a deduction for dependents, an NCM (Tax Reference Unit) rule (MVA, Base Value, Increase) previously registered in the earlier stages of the tax configurator.

Example:

Problem - Configure a service rate for my generic tax

I will create a new Rate Rule and set the Origin Value = 06 - Manual Formula, taking the following step in the formula:

• Field Rate Rule to be queried = 06 - Calculation Index
• Field Rule Query

São criados automaticamente pelo sistema.

Foi criado o Índice de cálculo para operações que necessitam de tratamento específico, pois dessa forma o Protheus conseguirá identificar que aquela fórmula poderá conter uma alíquota de serviço, uma dedução por dependentes, uma regra de NCM (MVA, Pauta, Majoração) previamente cadastrada nas etapas anteriores do configurador de tributos.

Exemplo:

Problema - Configurar uma alíquota de serviço para meu tributo genérico

Criarei uma nova Regra de Alíquota, selecionarei o Valor Origem = 06 - Fórmula Manual, na fórmula faço o seguinte passo:

• Campo Tipo da Regra a ser consultada = 06 - Índice de Cálculo
• Campo Consulta de Regra = I:ALQ_SERVICO
• Clicar no botão Adiciona

...

• Click Add

Manual Value

Select this option to enable the field Value to be added to formula, so you can add a fixed value for the calculation base rule, rate or even for the Calculation Rule of the tax.

Enter the value desired and choose the operation, whether to add, subtract, multiply or divide the value. Click the operator button, then add the value. If you want to leave only the fixed value in the formula, click Clear and add the value.

...

ICMS verification x Entry Adjustment Rule

In this session, we show what the ICMS verification looks like when there are legacy entry codes (TIO) x Tax Configurator.

Example of an incoming invoice:

Image Added

Example of an outgoing invoice:

Image Added

Screen with verification of Local ICMS:

Image Added

The system begins to perceive whether the entry originates in the configurator.

Given the same entry code and legacy as well as tax configurator both use them, the behavior is the same:

Image Added

See code "SP100090748"

This behavior expands other verification tabs

Ao selecionar essa opção é habilitado o campo Valor a ser adicionado na fórmula, com isso é possível informar um valor fixo para a regra de base de cálculo, alíquota ou até mesmo a Regra de Cálculo do tributo.

Preencha com o valor desejado e escolha a ação que deseja fazer com o valor, caso o valor deva ser somado, subtraído, multiplicado, dividido, clicar no botão do operador e depois adicione o valor. Caso queira deixar apenas o valor fixo na fórmula, é preciso clicar no botão Limpar e depois adicionar o valor.

Apuração ICMS x Regra de Ajuste de Lançamento

Nessa sessão será mostrado como ficará a apuração do ICMS quando houver códigos de lançamentos do legado (TES) x Configurador de Tributos.

Exemplo de uma NF de entrada:

Image Removed

Exemplo de um NF de Saída:

Image Removed

Tela com apuração do ICMS Próprio:

Image Removed

O sistema passa a distinguir se a origem do lançamento é do configurador.

Caso tenha o mesmo código de lançamento e eles sejam utilizados tanto pelo legado quanto pelo configurador de tributos, o comportamento é o mesmo:

Image Removed

Vide o código "SP100090748"

Esse comportamento se expande as outras abas de apuração.

ICMS-ST

DIFAL

Débitos Especiais

Special Debits

Crédito Extra Credit - ApuraçãoVerification

Em todos os cenários acima foi necessário criar uma regra de ajuste de lançamento no configurador de tributos, nas quais serão detalhadas na pasta de documentação "Cálculos do Configurador de Tributos"

...

In every scenario above, we had to create an entry adjustment rule in the tax configurator. Access the documentation folder "Tax Configuration Calculation" for details.

Messages Entry Adjustment Rule X EFD ICMS/IPI

Nesta seção será mostrado como fica o arquivo do SPED com relação as mensagens cadastradas na rotina de Regra de Ajuste Lançamento do configurador de tributos.

Na ilustração abaixo é feito a amarração das mensagens com uma regra de ajuste.

Image Removed

Ao gerar os movimentos de Entrada ou Saída de nota, o sistema vai armazenar os registros na tabela CDA e as mensagens decodificadas na tabela CJL, na qual serão amarrados com uma ID. 

Obs.: A parte abaixo será de teor técnico e foge um pouco da experiência do usuário, todavia é necessário para entendimento do fluxo da rotina.

This section shows how the SPED file relates to the messages registered in routine Entry Adjustment Rule of the tax configurator.

In the illustration below, the binding of messages to an adjustment rule is executed.

Image Added

When you generate invoice Inflow or Outflow transactions, the system stores the records to table CDA and the decoded messages in table CJL, in which they are bound to an ID. 

Note: The section below is technical and diverges from user experience, though it is necessary for comprehension of routine flow.

Table CDA - Adjustment Code EntriesTabela CDA - Lançamentos de Código de Ajuste:

Tabela Table CJL - Controle de Mensagens Decodificadas:Decoded Message Control:

To put it simply, I took only one of the IDs related to code SP40090227 of item 1 or the invoicePara simplificar peguei somente uma das ID's referente ao código SP40090227 do item 1 da NF.

Obs.Note: O campo Field CJL_INDICE determina para qual bloco a mensagem deverá ser direcionada.determines to which block the message must be directed.

After processing the monthly verifications, find below an example of how the Após o processamento das apurações mensais, abaixo um exemplo de como fica o arquivo da EFD ICMS/IPI file looks:

Tributos Legado contemplados pelo Configurador de Tributos 

Com a disponibilização do configurador de tributos, alguns tributos calculados com configuração legado(cadastro de produto, exceção fiscal, UFxUF, cadastro de TES etc) poderão ser configurados e gerenciados também por meio do configurador de tributos. 

Abaixo a lista com os tributos calculados atualmente pelo sistema que estão disponíveis no configurador:

Legacy Taxes used by the Tax Configurator 

You can also use the tax configurator to configure and manage some taxes calculated with legacy settings (product register, tax exception, StateXState, TIO register, etc.). 

See below a list of the taxes currently calculated by the system, which are available in the configurator:

Caso o mesmo tributo seja configurado para ser calculado através dos cadastros legado e também no configurador, as regras do configurador terão maior prioridade. De qualquer forma é interessante desabilitar o calculo dos tributos legado uma vez que este esteja cadastrado no configurador de tributos.

Conforme a evolução do configurador, esta lista de tributos aumentará, e mais tributos legado poderão ser cadastrados aqui no configurador de tributos.

Principais Rotinas e Tabelas

Principais rotinas do configurador de tributos genéricos:

...

If the same credit is configured to be calculated through legacy registers and also in configurator, the configurator rules have higher priority. Anyways, disabling the legacy tax calculation makes sense, once it is registered in the tax configurator.

As the configurator evolves, this list of taxes will increase, and you will be able to register more legacy taxes in the taxes configurator.

...

Main Routines and Tables

Main routines of generic tax configurator:

Main tables of generic tax configurator:

Principais tabelas do configurador de tributos genéricos:

Contabilização dos tributos genéricos

Os valores dos tributos poderão ser contabilizados de duas formas, no processamento da apuração e no contabilização do documento fiscal.

Para contabilizar o tributo na apuração, foram criados dois novos códigos de lançamento padrão, 767 para inclusão e 768 para exclusão/estorno, quando estes lançamentos padrão são executados, o título gerado do tributo com valor a pagar estará devidamente posicionado.

...

Generic Tax Booking

There are two ways to book tax values, when processing the verification and when booking the tax document.

To book the tax in the verification, we have created two new standard entry codes: 767 for addition and 768 for deletion/reversal. When you execute these standard entries, the tax bill generated with a value payable will be duly selected.

To book the tax in the tax document, there is no need to create any standard entry code. The same already existing codes are used for invoice booking, in which case the tax values become available in table F2D (Calculated Generic Taxes), which are linked to the tax document through fields D1_IDTRIB and D2_IDTRIB. In this case, we must emphasize that there may be more than one tax calculated by tax document item, so there may be more than one transaction in tables F2D for the tax document item Já para contabilizar o tributo no documento fiscal, não foi necessário criado nenhum código de lançamento padrão, serão utilizados os mesmo códigos já existentes para contabilização da nota fiscal, e neste caso os valores dos tributos estarão disponíveis na tabela F2D(Tributos Genéricos Calculados), que são vinculados com o documento fiscal por meio dos campos D1_IDTRIB e D2_IDTRIB. Neste caso é importante ressaltar que pode haver mais de um tributo calculado por item de documento fiscal, então poderá haver mais de uma movimentação na tabela F2D para o item de documento fiscal (SD1, SD2).

...

...

Questions and Answers

01 -

...

When should I use the tax configurator?

Use the tax configurator when you need to calculate, collect or verify a specific tax, such as the various existing state fundsO configurador de tributos deverá ser utilizado nas situações que houver necessidade de calcular, recolher ou apurar determinado tributo, por exemplo os diversos fundos estaduais existentes, ICMS, IPI, ISS, entre outros. Ao configurar um tributo legado, como o ICMS, no configurador e possuir a configuração do tributo no TES o configurador irá sobrescrever as configurações do legado no momento do cálculo do imposto ou escrituração.

02 - O configurador de tributos não está disponível no menu, como devo proceder?

Neste caso o sistema não atende o requisito mínimo, que é estar atualizado pelo menos com o release 12.1.23, o sistema precisa ser atualizado para ter esta funcionalidade disponível.

03 - Estou tentando configurar uma regra de determinado tributo, porém nenhuma das opções de configuração me atendem, o que devo fazer?

Neste caso deverá ser aberto um ticket no suporte técnico, explicando a necessidade de configuração, com embasamento legal, para que seja analisada a possibilidade de disponibilizar novas opções de configuração.

04 - Meu tributo não aparece na listagem da apuração. O que aconteceu?

Para que um tributo seja listado na apuração pelo menos uma de suas variações (regra de cálculo) deve possuir uma regra de apuração vinculada.

Não há necessidade de alterar nada nas movimentações. Basta vincular uma regra de apuração em uma ou mais regras de cálculo e processar a apuração novamente.

05 - Preciso incluir mil registros no perfil Tributário de Produto, existe alguma forma para auxiliar este preenchimento ou terei que fazer manualmente?

Sim existe, para esta tarefa existem os facilitadores dos perfis de Participante, Produtos, Operações e UF Origem/Destino.
Os facilitadores fornecem mecanismos de filtros, para que as inclusões ou exclusões sejam realizadas em lote, pois dependendo da quantidade de registros seria uma tarefa inviável de ser realizada manualmente. Os facilitadores estão disponíveis no próprio cadastros de perfis.

06 - Preciso gerar título financeiro para determinado tributo, porém minha TES está com "Gera Duplicata" = "Não". Existe alguma forma de gerar o título neste contexto?

Sim existe, para gerar o título neste contexto, no módulo SIGAFAT (Faturamento), na geração do Documento de Saída, será apresentada a tela de parâmetros. Ajuste a pergunta: Gera Tit FUNRURAL/Conf Trib ? com a opção Sim. Desta forma os tributos calculados que possuírem regra financeira vinculada poderão ter os títulos gerados.

07 - Como configurar corretamente o Desconto da Zona Franca de Manaus no configurador?

etc. When you configure a legacy tax, such as ICMS, in the configurator, and you have the configuration of the tax in TIO, the configurator overwrites the legacy configurations at the time of bookkeeping or tax calculation.

The tax configurator is not available on the menu. How should I proceed?

In this case, the system does not meet the minimum requirements. You should at least update the system to release 12.1.23 to obtain this feature.

I am attempting to set a rule for a given tax; however, none of the optional settings meets my needs. What can I do?

In this case, open a ticket to technical support explaining the need for configuration, with legal basis, so they may analyze the feasibility of making new configuration options available.

My tax does not show on the verification list. What happened?

To list a tax on the verification, at least one of its variations (calculation rule) must have a linked verification rule.

There is no need to change anything in the transactions. Just link a verification rule to one or more calculation rules and process the verification again.

I need to add a thousand records to the Product's Tax Profile. Is there anything to help me do this or do I have to do it manually?

Yes, there is! This task has facilitators for Participant, Products, Operations and Origin/Destination State profiles.
The facilitators provide filter mechanisms for batch additions and deletions, as a great quantity of records would make the manual performance of this task unfeasible. The facilitators are available in the profile register itself.

06 - I need to generate a financial bill for a given tax; however, my TIO is set to "Generate Trade Note" = "No". Is there any way to generate the bill in this context?

Yes, there is. To generate the bill in this context, in module SIGAFAT (Billing), the parameters screen is displayed when you generate the Outgoing Document. Adjust the question: Generate FUNRURAL Bill/Tax Conf? with option Yes. Thus, the calculated taxes that have a linked financial rule can read the generated bills.

07 - How can I correctly set the Manaus Free Trade Zone Discount in the Configurator?

To correctly configure the Manaus Free Trade Zone discount in the configurator, create a generic TIO (ICMS Calc. = No and IPI Calc. = No) and fully configure the Base, Rate and Calculation Rule in the configurator. Another alternative is to use 06 - Origin ICMS Base in the calculation base profile of the configuratorPara configurar corretamente o o desconto da Zona Franca de Manaus no configurador deve-se criar uma TES genérica (Calc. ICMS = Não e Calc. IPI = Não) e fazer toda a configuração de Base, Alíquota e Regra de calculo no configurador. Outra alternativa é utilizar no perfil de base de calculo do configurador 06 - Base ICMS origem.