The Online Panel is a feature that displays module indicators on the main screen in Smartclient. To configure these indicators, follow these steps:

- Open the Protheus Application Server appserver.ini file.

- Add the 2 lines below in the section of the environment that will use the Online Panel:

PANELSERVER=server ip

PANELPORT=TCP port of this server

Example:

(This setting must be made on the Appserver that users access. The indicated "PANELPORT" must be the [TCP] port of another Appserver that will start only to process the Online Panels)

[Environment]
SourcePath=C:\TOTVS 12\Microsiga\protheus\apo\
RootPath=C:\TOTVS 12\Microsiga\protheus_data
...
PANELSERVER=localhost
PANELPORT=1299

After setting up the appserver.ini file, follow the steps below:

- Access Configurator > User > Passwords > Policy

- Enter the Other/Online Panel tab.

- On the left side of the screen, mark the modules for which you want to use the indicators.

- Click on the Module on the left side, and then on the right side of the screen the Panels available for this module will be displayed. Check the ones you want to use.

- Click Confirm.

- Access User > Passwords > Groups.

- Click the Administrators group and then Change.

- On the Group tab, click the OnLine Panel tab.

- Enable the panels selected before in the Policy routine.

- Click Confirm.

- Access User > Passwords > Users.

- Click on the user that will use the Online Panel, and then click Change.

- Click on the Parameterization/Online Panel tab.

- Select, from the available panels, which one this user will have access to, and click Confirm.

- After setting, the Online Panel is ready for use. Below is an example image of an Online Panel in the module: