Índice
Speaking of publishing image in community ...
In the existing Images in the communities it is possible to make the publication of images and photos, and manage them.
This tab only appears if the administrator or moderator enable it in the community, i.e. define the community allows the publication of images.
Post multiple images in a community
The supported formats for adding images in communities are: JPG, JPEG and PNG. In addition to images with the CMYK coloring pattern.
To post multiple images in the community, follow the steps below:
01. In the community where the images will be posted, click the icon 
below the Post in field. This icon represents the posting of images.
02. The user's workstation will open for image selection.
03. Images will appear in thumbnails next to the posts bar.
04. If you want to add images directly from the image gallery, click the icon .
05. The image gallery will be displayed. Select the desired images.
06. The images will appear in thumbnails next to the posts bar.
07. You can add text to the post with the images. You can also add emojis next to the post via the icon 
.
08. Click Post.
You can post in more than one place at the same time through Post In. When pressing this field, the communities in which the user concerned has permission will be listed. You can post in up to three different communities.
Publish an image in a community
01. In the community in which the image is published, the Images tab.
The Images tab only appears if the administrator or moderator of the community enable it.
02. Press Add images.
The publication of images can also be done by drag and drop (drag and drop).
03. Select the image to be published.
04. Confirm the inclusion of the image.
Post to multiple communities from one community
01. Access the community in which you wish to post;
02. With the image of the post already embedded next to the publish bar, click Post in;
03. The list of communities will be displayed;
04. Select the desired communities. You can choose as many communities as you wish. There are no limits to adding communities;
Note that selected communities will be highlighted in tag format. If you want to swap or remove any community just click the X next to each community name.
The post will be made in the first selected community and displayed as shared in the other communities.
05. You can add text to the post with the images. You can also add emojis next to the post via the icon .
06. Click Post.
Show Image Published in Community
01. In the community from which the image is displayed, press the tab Images .
02. In the listing displayed, locate the image being displayed and click on it to open it.
03. Show the image.
To return to the listing of existing images, trigger back to, Gallery, located in the upper right corner of the window.
Rename Image Published in Community
01. In the community where the image is published, the Images tab.
02. In the listing displayed, locate the picture you want to rename.
03. Press the arrow in the upper-right corner of the frame corresponding to the image that will be renamed.
04. Activate Rename.
05. Enter a new name for the image.
06. Press Save.
Remove Image Published in Community
01. In the community where the image is published, the Images tab.
02. In the listing displayed, locate the image to be deleted.
03. Press the arrow in the upper-right corner of the frame corresponding to the image that will be deleted.
04. Press Remove.
05. In the confirmation message that appears, press Yes to complete the deletion or Not to drop out of the action.
Upgrade physical file of the image Published in Community
01. In the community where the image is published, the Images tab.
02. In the listing displayed, locate the image that has the physical file updated.
03. Press the arrow in the upper-right corner of the frame corresponding to the image that will be updated.
04. Trigger Upgrade.
05. Drag and drop (drag and drop) the physical file updated image or press Browse file to locate and select it on the workstation.
06. Trigger Upgrade.
Share Image
01. In the community where the image is published, the Images tab.
02. Locate the image to be shared.
03. Trigger the sharing icon, located in the left corner of the social actions of the image that you want to share.
04. Press Share.
05. Enter the users and/or communities with which we want to share the image.
When you start to type the name of the user or of the community, suggestions that match the information typed are presented.
An alert is sent if the user or the community entered does not have access to the information to be shared.
06. Enter a message to go with the sharing, if desired.
The message that will accompany the shared content can contain up to 700 characters.
07. Press Share; or Discard to withdraw from action, if desired.
Get Link of the image
01. In the community where the image is published, the Images tab.
02. In the listing displayed, locate the image of which you want the link.
03. Trigger the sharing icon, located in the left corner of the social actions of the image of which you want the link.
04. Press Copy link.
To activate this option, the link address for the image is copied to the Clipboard, allowing it to be shared on other sites, such as documents, tools, e-mails etc.
If the browser used does not support sending the URL to the clipboard, when pressing Copy link, a table is presented containing the selected link and it is necessary to press "Ctrl + C" to copy it effectively.
It is possible that some users cannot view the contents for which the link directs due to access permissions.
View image shares
01. In the community where the image was posted, click the Images tab.
02. The image gallery will be displayed, click on the orange square that contains the number of shares below the icon 
located at the bottom of the box corresponding to the image.
03. A screen will be displayed showing the number of shares and the where the post was shared.
You can search for a specific share through the Search field, located in the upper-right corner of the screen.
You can view the content in the location where it was shared by clicking the icon 
located in the right corner of the line corresponding to the share.
Create image gallery in Community
01. In the community in which the Gallery of images will be created, trigger the Images tab.
02. Trigger Create, Gallery, located in the upper right corner of the window.
The trigger Create, Gallery, the new gallery is presented.
03. Press the arrow in the upper-right corner of the frame corresponding to the image gallery created.
04. Activate Rename.
05. Enter a name for the image gallery.
06. Press Save.
Rename image gallery in Community
01. In the community in which the Gallery of images will be changed, press the tab Images.
02. Find the Gallery of images that will be renamed.
03. Press the arrow in the upper-right corner of the frame corresponding to the image gallery which will be renamed.
04. Activate Rename.
05. Enter the new name for the image gallery.
06. Press Save.
Remove image gallery in Community
01. In the community to which the Gallery of images belong, engage the tab Images.
02. Find the Gallery of images will be deleted.
03. Press the arrow in the upper-right corner of the frame corresponding to the picture gallery that will be deleted.
04. Press Remove.
05. In the confirmation message that appears, press Yes to complete the deletion or Not to drop out of the action.
Share pictures gallery
01. In the community to which the Gallery of images belong, engage the tab Images .
02. Find the Gallery of images to be shared.
03. Trigger the sharing icon , located in the left corner of the social actions of the Gallery of images that you want to share.
04. Press Share.
05. Enter the users and/or communities with which we want to share the pictures gallery.
When you start to type the name of the user or of the community, suggestions that match the information typed are presented.
An alert is sent if the user or the community entered does not have access to the information to be shared.
06. Enter a message to go with the sharing, if desired.
The message that will accompany the shared content can contain up to 700 characters.
07. Press Share; or Discard to withdraw from action, if desired.
Get Link from image gallery
01. In the community to which the Gallery of images belong, engage the tab Images.
02. Locate the image gallery for which you want the link.
03. Trigger the sharing icon, located in the left corner of the social actions of the Gallery of images that you want to share.
04. Press Copy link.
To activate this option, the link of targeting to the Gallery of images is copied to the Clipboard, allowing it to be shared on other sites, such as documents, tools, e-mails etc.
If the browser used does not support sending the URL to the clipboard, when pressing Copy link, a table is presented containing the selected link and it is necessary to press "Ctrl + C" to copy it effectively.
It is possible that some users cannot view the contents for which the link directs due to access permissions.
View image gallery shares
01. Fire the frame that contains the number of times the image gallery has been shared, located on the sharing icon in the image gallery.
02.The image gallery will appear, click on the sharing icon located at the bottom of the box corresponding to the image.
03. The image will be displayed, at the end of it click the orange square containing the number of shares.
04. A window showing how many shares and where the article was shared will be displayed.
You can search for a specific share through the Search field, located in the upper-right corner of the screen.
You can view the content in the location where it was shared by clicking the icon located in the right corner of the line corresponding to the share.
Insert image in a gallery of images
01. In the community to which the Gallery of images belong, engage the tab Images.
02. Locate and access the gallery in which the image will be inserted.
03. Press Add images.
To trigger Add images, just follow the steps of the basic path to publish the image in the gallery.
Please note!
This documentation is valid from the 1.8 update - Mist. If you use a previous update, it may contain information different from what you see on your platform.
Visão Geral
Import HTML Content
Conteúdo das Ferramentas
Tarefas