Páginas filhas
  • Accounting Report General Parameter Settings (CTBR040 - SIGACTB)

There are several ways of issuing reports in Management Accounting environment. This flexibility is the result of a wide range of parameterizations related to such environment. Parameterizations involved are briefly described below. Depending on the report, they may be relevant or not.

  • MV_TPVALOR

This parameter, which can be configured through Configurator environment, controls the way a value to be printed is identified. Enter:

D -> To print characters D (when balance is Debit) or C (when balance is Credit). This type of identification ignores the normal condition of the account.

S -> To print a minus sign before the value when the account balance is opposed to the normal account condition.

P -> To print parentheses when the account balance is opposed to the normal account condition.

C -> To print only C when the account balance is Credit, regardless of the normal account condition. Debit values have no printed identifier.

Reports involved: all the ones that print account balances.

  • Book Configuration

Several reports of the Management Accounting environment enable the use of Configuration of Books. Exceptions referring to Configurations are described below:

  • Mask of Account / C.Center / Item / Value Class

If no book configuration is chosen in the report, accounting masks to be considered are the ones registered through Configurator environment in parameters MV_MASCARA and MV_MASCCUS (the accounting item and value class do not have masks of this type).

  • Management view

Depending on the report used, Management View does not apply. That is the case of reports of type Journal/Ledger, etc., which must effectively demonstrate accounting entries made.

These reports only use Configuration of Books to inherit accounting masks and value picture.

  • Picture of values

If you want to change the picture of values being printed, use this field. Otherwise the system standard picture will be used.

  • Decimals

If you want to change de amount of decimals to be printed, change this field. Otherwise the value of parameter MV_CENT will be considered.

  • MV_ATUSAL

Some reports require that basic balances are updated before issuing the report.

If parameter MV_ATUSAL is set as N (do not update basic balances), a warning is displayed indicating that the routine of Balance Update must be executed. If the parameter is set as S, such warning is not displayed.

  •  Balance Parameters